About Us

Felman Production shop

Felman Production generates a residual commercial by-product, silicomanganese slag, through the production of Ferro Silicomanganese (FeSiMn). The slag is an inert solid green material consisting primarily of aluminum, manganese, magnesium, silicon, and calcium oxides.

Production

The slag is generated during the production of ferro silicomanganese using electric arc furnaces. The molten slag is casted, cooled by spraying it with cold water, and then crushed to the desired size.

Potential Uses

Potential uses of the commercial by-product include re-melt/reproduction, industrial fill, road base, textiles manufacturing, etc.



Chemical Composition

Below please find the available metals totals for the chemicals that were detected as components of the slag material. The material is considered non-hazardous as shown by Toxicity characteristic leaching procedure testing conducted on the material. A qualified and licensed environmental laboratory is currently conducting a general assay of the material to determine the % w/w of the different chemical components.

TCLP Testing of Slag
ChemicalSlag LeachateRCRA Hazardous  Waste Limits
mg/Lmg/L
ArsenicND5.0
Barium0.85100.0
Cadmium0.00111.0
Chromium0.025.0
LeadND5.0
MercuryND0.2
SeleniumND1.0
SilverND5.0

 

Slag Available Metals Totals
Chemicalmg/kg
Aluminum88,900
Barium5,590
Calcium151,000
Iron7,230
Magnesium28,400
Manganese85,000
Potassium12,200J

 

Physical Aspects of the Material

The material is a hard solid stone that has irregular fracturing similar to chert or glass. The material is primarily green, gray, and black in color and is odorless. The bulk density of the material is approximately 635 /- 100 kg/m3.

Material Size: Generally, one-to-four-inch stone, but can be crushed and sized to the clients desired specifications.

 

Hygiene and Health Aspects

The full health and hygiene recommendations regarding this material is available on the product Safety Data Sheet (SDS) for Felman’s ferro silicomanganese slag. With use of the proper personal protective equipment and adhering to the intended use, proper handling, and storage in accordance with the SDS the product does not pose a threat to human health.

Storage and Handling

The material can be stored openly on any surface in uncovered piles as it is not likely to leach any chemicals of concern. Proper precautions should be taken to prevent the transport of fines from the material storage areas.

Transport/Delivery

The slag material is generally delivered in bulk by truck or barge.